Acrylic Signage
Custom acrylic signage in Singapore, cut, formed and finished in our own workshop. Acrylic is the material most businesses land on for reception logos, shopfront lettering and office branding, because it holds colour cleanly, machines to a crisp edge and looks considerably more expensive than it costs. We make it to your artwork, in your colours, sized for the wall it is going on.
What is acrylic signage?
Acrylic signage is made from cast or extruded acrylic sheet, also sold as Perspex or plexiglass, cut to your letterforms or logo and either mounted flat, built up into 3D lettering, or lit from within. It can be polished to a glass-like edge, sprayed to an exact brand colour, brushed to look like metal at a fraction of the weight, or left clear so the wall shows through behind it.
It is the default choice for interior and sheltered signage for good reasons. It is light enough to hang on plasterboard without heavy structural fixings, it cuts to fine detail that metal cannot hold, and cast acrylic in particular keeps its colour for years rather than yellowing. The trade-off is that it is happier under cover than in permanent direct sun, so for a fully exposed facade we would usually steer you toward aluminium composite or metal instead.
At a glance
- Cast or extruded acrylic, 3mm to 25mm depending on the build
- Flat panels, built-up 3D lettering, or illuminated versions
- Sprayed to your exact brand colour, or clear, frosted and mirrored
- Light enough for plasterboard and glass mounting
- Crisp on fine detail that metal cannot reproduce
- Best suited to interiors and sheltered exterior positions
Why acrylic is the most requested material
Where acrylic signage works
Acrylic suits almost any position that is indoors or under cover. These are the ones we make most often.
Flat, built-up or illuminated: the three acrylic builds
Flat cut acrylic is a single sheet cut to shape and mounted directly or on standoffs. It is the most affordable build and suits door signs, small logos and anywhere the wall behind is clean and flat. Thickness usually runs 5mm to 10mm, and the standoffs lift it off the wall so it casts a light shadow.
Built-up acrylic letters are fabricated with a face and returns, giving real depth of 20mm or more. This is what most people picture when they think of a reception logo. The depth catches light, reads properly from an angle, and looks substantially more expensive than flat cut for a moderate price difference.
Illuminated acrylic adds LEDs behind or within the letters. Front lit pushes light through a translucent face for maximum brightness. Halo or back lighting bounces light off the wall behind for a softer premium glow. If you are considering either, our frontlit signage and backlit signage pages go into the lighting detail properly.
Cast or extruded, and why it matters
Acrylic comes in two grades and the difference shows up years later, not on day one. Cast acrylic is made in sheets and is harder, more chemically stable and noticeably better at holding colour over time. Extruded acrylic is made by pushing molten material through a die, which makes it cheaper and more uniform in thickness, but softer and more prone to yellowing under UV.
For most interior work extruded is perfectly adequate and we will not push you to spend more. For anything that catches daylight through a shopfront window, or any piece you expect to keep for many years, cast is worth the difference. It also polishes to a better edge, which matters when the acrylic is clear and the edge is part of the look.
One honest caveat: no acrylic loves permanent, direct, unshaded Singapore sun. If the position gets hit all afternoon, we will recommend a different material rather than sell you something that will disappoint.
Finishes and how the same shape looks different
The cut is only half the job. A clear polished edge suits a minimal, glassy look and works best when the wall behind is plain. Solid sprayed colour gives the strongest brand hit and hides the acrylic entirely, which is what most corporate lobbies want. Brushed silver or gold vinyl on acrylic gives a metal appearance without metal weight or cost, and is a common choice when the budget will not stretch to stainless steel.
Frosted and satin finishes diffuse light, which is useful in front of a window or where you want the sign to read without dominating. Mirrored acrylic is striking but shows every fingerprint, so we tend to steer it away from positions people walk close to. Printed acrylic lets you put full colour artwork or photography behind a clear face, which suits menu boards and feature panels more than logos.
Options to settle before we quote
These six choices account for most of the difference between a modest quote and a large one.
- Build type: flat cut, built-up 3D lettering, or illuminated
- Thickness: typically 5mm to 10mm flat, 20mm or more for built-up depth
- Grade: cast for colour stability and edge quality, extruded for budget interior work
- Finish: polished clear, sprayed brand colour, brushed metal effect, frosted, mirrored or printed
- Mounting: standoff pins, flush adhesive, tray backing, or a hidden rail for long lettering
- Size, which drives sheet usage and is the single biggest cost factor
If you are comparing materials, metal signage covers stainless steel for entrances that need more presence, and the signage Singapore hub compares all nine types side by side.
What acrylic signage costs in Singapore
Acrylic sits at the accessible end of the signage range, which is a large part of its appeal. Cost is driven mainly by overall size, build type and whether the piece is illuminated.
| Small acrylic signboards | from around S$300 to S$700 | Door plates, unit numbers, small flat-cut logos and single-panel interior signs. |
| Built-up 3D lettering and logos | around S$800 to S$2,800 | Reception logos, shopfront lettering and multi-piece office branding in built-up acrylic. |
| Large or illuminated acrylic | S$2,500 to S$5,000 and above | Large-format feature walls, illuminated acrylic lettering and full premises sets. |
These ranges are for budgeting. The real figure follows a site measurement, because wall condition, mounting method and access all affect installation. Site visits are free and carry no obligation.
How we work
Four stages, the same on a single door plate or a full office set.
Why Creative Sign for acrylic
Acrylic is unforgiving of sloppy work. A rough edge, a slightly off colour, or letters set a few millimetres out of line are all obvious once the sign is on a wall at eye level. We cut, finish and install in-house specifically so those things stay controlled rather than passing between suppliers.
We also install from a full-size template rather than by eye, which is the difference between lettering that looks deliberate and lettering that looks nearly right.
Related services: frontlit signage, backlit signage, lightbox signage, metal signage and LED neon signs. See the full range on our signage Singapore page.
What we stand behind
Acrylic signage is usually straightforward to install, but the work still happens on your premises and sometimes at height, so we carry public liability insurance for every on-site job. Where an acrylic sign is illuminated and needs connecting to mains supply, that connection is made by a BCA-Licensed Electrical Worker on our own team.
Fabrication is warranted for 12 months and installation for 6 months. In practice that covers the things that would be our fault rather than wear: a lifting bond on a standoff, a finish defect, letters that have moved out of alignment. The terms go on your quote in writing so there is nothing to interpret later.
- Public liability insurance on all installation work
- BCA-LEW licensed for any illuminated acrylic connection
- 12 months warranty on fabrication
- 6 months warranty on installation
- Terms written on the quote, not buried in small print
Frequently asked questions
How much does acrylic signage cost in Singapore?
Small acrylic signboards and door plates typically start around S$300 to S$700. Built-up 3D lettering and reception logos usually run S$800 to S$2,800. Large-format or illuminated acrylic goes from S$2,500 upward. Size, build type and illumination are the main cost drivers, with installation access on top.
What is the difference between flat and built-up acrylic?
Flat cut acrylic is a single sheet cut to shape, usually 5mm to 10mm thick, mounted on standoffs. Built-up letters have a face and returns fabricated together, giving 20mm or more of real depth. Built-up costs more but reads as far more substantial, catches light better and looks correct from an angle rather than flat on.
Can acrylic signage go outdoors in Singapore?
In sheltered positions, yes. Under a covered walkway or a mall frontage acrylic performs well for years. In full unshaded sun it is not the right material, because UV eventually affects colour and extruded grades can yellow. For fully exposed facades we recommend aluminium composite panel or metal instead, and we will say so during the site visit.
Can you match my exact brand colour?
Yes. Acrylic can be sprayed to a specific colour reference, which is more accurate than trying to source a stock coloured sheet in the right shade. Send your brand guidelines or a printed sample and we will match it, then keep that reference on file so any later pieces match the first ones.
How is acrylic signage fixed to the wall?
Most built-up and flat-cut work goes on standoff pins, which lift the letters off the wall and create a shadow line. Flush adhesive mounting suits glass and very smooth surfaces. For long lettering we use a hidden rail so the whole run stays level. All three are light enough for plasterboard with the right fixings.
How long does acrylic signage take to make?
Usually about two to three weeks from approved artwork to installed sign. That covers the scaled mock-up and your sign-off, cutting and finishing in the workshop, and installation. Simple flat-cut pieces can be quicker; large multi-piece sets and anything illuminated take longer.
Does acrylic scratch or discolour?
Acrylic scratches more easily than metal, so we avoid mirrored and gloss finishes in positions people brush past. Cast acrylic holds colour very well over time. Extruded acrylic is more prone to yellowing under UV, which is why we specify cast for anything getting daylight. Clean with a soft damp cloth and avoid solvent cleaners, which cause crazing.
Can you repair or update an existing acrylic sign?
Often, yes. Individual letters can be remade and swapped, panels can be resprayed, and directory strips can be replaced without redoing the whole board. If a logo has changed we can frequently reuse the mounting positions. We will tell you during the visit whether a repair makes sense or whether remaking is the better value.
What warranty and insurance do you provide?
Every sign we make carries 12 months warranty on fabrication and 6 months on installation, and those terms are stated in writing on your quote rather than left implied. We also carry public liability insurance for all on-site work, including installations needing scaffolding or a boom lift, and we are BCA-LEW licensed, so any mains connection is made by our own licensed electrical worker.
Brief us on your acrylic sign
Send your artwork, rough dimensions and a photo of the wall, and we will come back with options and pricing. Call +65 6747 8011 or email creativeas2004@yahoo.com.sg.
